304不銹鋼材料1.4313是馬氏體級，耐的結垢高朝，調質熱加工后耐久性性好。X3CrNiMo13-4鋼的機戒耐結垢性是因此生物學好分中鉬和鎳的高分子量。等耐熱合金生成劑禁止了增高級碳分子量的必須——給定濃硫酸濃度比較于奧氏體304不銹鋼材料。盡管鎳分子量低，但鎳分子量約為4%，不錯提生了鋼對各方面的結垢壞境的抵觸力——兩次機戒耐結垢性。X3CrNiMo13-4鋼粉絲可生育自由高達300℃在攝氏度下事情的鑄件加工和鑄件加工，包括顯示在各方面的結垢壞境中的鑄件加工，而且要保持滿足的面前提條件括抗氯化物特性)。QT650.QT780和QT900前提條件下，調質熱加工后最喜歡交樓鋼管。半輔料廣泛用于油品生育.石油化工.在冶金行業內和能源開發行業內，齒輪機顯示在高溫潤高溫下.泵.減小機機械部件。鋼痛感合悍接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50批發商EN1.4313馬氏體不銹鋼板更具退火處理特征參數（+A）工作狀態、回火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，要求哪一名需要跟銷售業務說模糊哦。